Eco Wave Power is a leading onshore wave energy technology company that has developed a patented, smart and cost-efficient technology for turning ocean and sea waves into clean electricity. More information on Eco Wave Power can be found in the following short video that was prepared by The Sustainable Markets Initiative by HRH Prince Charles, the World Economic Forum, and the Bank of America:
Eco Wave Power has studied Comune di San
Felice Circeo and has identified
three potentially suitable sites for the deployment of EWP’s wave energy
technology in the municipality. The three sites identified contain
existent man-made structures on which the EWP system can potentially be
installed to generate clean renewable electricity from the local waves in the Tyrrhenian Sea. Based on EWP’s preliminary assessment, the
total space available at the three sites identified in commune may be
sufficient for the installation of a multi-MW wave energy power station, which
will supply clean electricity to the Cummune for use in bicycle recharging
stations and public lighting.
How does the Eco
Wave Power Technology Work?
The image below illustrates
the EWP system’s core working principles.
Uniquely shaped floaters (1) rise and fall with the up and down movement of the waves, utilising
its buoyancy force, the changes in water level and flow, the "air
lock" effect (hydrofoil), and the vertical movement of waves leading to an
efficient energy conversion process. Different types of floaters enable the
system to be optimised for different types of wave regimes, depending upon the
location. The EWP floaters are equipped with sensors that continuously monitor
the performance of the various subsystems and the surrounding ocean
environment, transmitting the data to EWP’s on-land systems. The data from the
sensors also serves to activate the storm protection mechanism in the case of
upcoming storms.
In working mode, the movement of the floater compresses the hydraulic
pistons (2), which send biodegradable fluid into the land-located
accumulators. The accumulators (3) collect the fluid and store it until
enough pressure is reached. When such pressure is reached the accumulators
discharge it with the purpose of rotating the hydraulic motor (4). The
hydraulic motor’s operational volume is automatically adjusted in accordance
with real-time waves and prevailing pressure in BARs. The asynchronous
generator (5) converts the rotation into electrical energy which is then provided
to the grid (through specialized inverters,). After decompression, the fluid
flows back into the non-pressurized hydraulic fluid tank (6) from where
it is re-used by the pistons, thus creating a closed circular system.
The following video that was prepared by the Weather Channel indicates
the key principles and features of the EWP innovative wave energy system:
Smart Control System
The entire
operation is controlled and monitored by a smart control system. The smart
control system manages the pressure release of the accumulators in a way that
stabilises the output and starts generating power at much lower pressure (30
bar vs 60 bar of a typical system).
Significantly, only the floaters and hydro cylinders (pistons) are located in the water; all other parts are based on land, thereby improving reliability, providing easy access for maintenance and repair, and eliminating the risk of oil or hydraulic fluid spill, as well as the risk of mechanical damage.
Storm Protection
In the event of storms, EWP floaters automatically “recognise” the type of waves, and when the waves are too high for the system to handle, the floaters automatically rise above the water level and lock in the upward position until the storm passes. When the waves return to an operable height, the system unlocks and recommences energy conversion and transmission of the electrical power to the grid.
Modularity
The Eco Wave Power technology is fully modular which results in several benefits. The scalability provided by the modularity of the technology allows for a gradual step by step expansion and increased application versatility. This means that a MW scale system is no more complex on a modular basis than a KW scale system.
According to
the United Nations, energy is the largest contributor to climate change
accounting for over 60% of global GHG emissions. As a result, there is a
significant need to adopt new and clean sources of electricity production
worldwide to tackle the lack of access to electricity and rising energy demand
while decreasing the pollution rates. Wave energy can be a large part of the
solution to the problem, as according to a 2020 report from IRENA, wave energy
has the potential to meet all of global energy demand with potential global
energy production from waves estimated at 29,500 terawatt-hours of electricity
per year and since nearly 2.4 billion people, about 40% of the global
population lives within 100km of a coast. Furthermore, in suitable locations wave
energy can produce electricity around the clock in contrast to other leading
renewable energy sources which are intermittent. According to estimates, the
successful development of wave energy technology could generate 188GW of energy
in Europe alone already by 2050, which would be equivalent to roughly 10% of all
the region's electricity needs.
The Comune
di San Felice Circeo, located in the province of Latina in Italy, is open to
the the Tyrrhenian Sea and, as a result, enjoys substantial wave activity,
which can be converted into clean electricity. EWP’s team has identified three
locations in the Comune which are potentially suitable for the installation of the
Eco Wave Power wave energy technology, which are (1) the Porto di San Felice
Circeo (41°13'27.4"N 13°05'41.5"E), which has two cement breakwaters of
a length of 470m and 190m, (2) Stabilimento Neanderthal (41°13'55.6"N
13°05'58.5"E) which has a cement breakwater of 55m length, and (3) Stabilimento
Cormorano (41°14'17.9"N 13°06'14.5"E) which has a cement breakwater
of 107m.
Based on the
above, the estimated total availability of existent man-made marine structures
to deploy EWP’s system in the Comune di San Felice Circeo is about 822 meters,
which could potentially be used to deploy a multi–MW EWP wave power
station.
If EWP’s wave energy technology were to be implemented in the Comune di San Felice Circeo it could supply clean electricity directly to recharging stations for bicycles ad scooters near the port, and any excess power could be used to power the public lighting system. To illustrate this, our team has prepared the two basic preliminary illustrations below for a potential EWP project integrated with a scooter recharging station at the Porto di San Felice Circeo:
The implementation of the EWP technology to power the re-charging stations will position the Comune as a leader in the adoption of new renewable energy technologies and at the forefront of innovation.
Through the implementation of EWP’s innovative technology, the
Comune di San Felice Circeo will have significant impacts on several areas of the
municipality, including health, job creation, and access to electricity. The
project will create the following impact:
Emissions reduction: Based on EWP’s initial
calculations, a 1MW installed capacity wave energy power station, with a
capacity factor of 42%, will produce annually around 3,695,712 kW/h of clean
electricity.
If the same amount of electricity was to be produced from
fossil fuels, the emissions would equal 2,613 metric tons of Carbon Dioxide,
which is equal to the carbon dioxide emissions from 294,027 gallons of consumed
gasoline, showing that the amount of GHGs avoided from a 1MW EWP power station
to be significant.
Therefore, a multi-MW wave energy power station installed in
the Comune di San Felice Circeo could significantly
reduce emissions in the region of the municipality by offsetting traditional
energy generation methods for electricity supply.
Air Pollution: Energy use and production in many countries (including countries in
the Mediterranean region) is a significant and immediate cause of high levels
of air pollution and other forms of environmental degradation. Global
dependence on cheap fossil fuel-based power generation methods has
significantly harmed the global environment and threatened the health of
millions of people worldwide. EWP’s technology offers an opportunity for
locally produced, clean, and affordable power generation in these environments.
Access to Electricity and Supply: One of the greatest benefits of the Eco Wave Power wave
energy technology is that it allows for power generation in proximity to
population centers, as it creates clean electricity directly on the shoreline,
thereby, allowing San
Felice Circeo to generate clean renewable electricity directly in the area of
the municipality without having to transport the electricity over long
distances. Furthermore, the technology will help increase the municipality’s
electricity supply and allow it to deliver cost-effective and clean electricity
for the use of the Municipality’s residents and for the re-charging of
e-scooters in the port area
Job Creation: According to the European Ocean Energy
Association, 400,000 jobs could be created by the Ocean Energy industry by
2050, if the European target of 188GW installed capacity of ocean energy is
fulfilled. The potential implementation of an EWP wave energy project in Comune
di San Felice Circeo will create several new direct (through hiring employees)
and indirect (through subcontractors) workplaces in the municipality. The
workplaces will be created throughout the different phases of the project
including licensing, feasibility studies, environmental studies, and detailed
planning. In addition, multiple jobs for engineers will be required - mainly
mechanical, hydraulic, civil, electrical and automation engineering. The actual construction of the wave energy
power stations will also create new employment opportunities for local civil
engineers, welders, technical professionals, electricians, and technicians.
Moreover, when the power station is constructed, there will be a significant
need for operation and maintenance professionals for 25 years (the lifespan of
the power station).
The EWP team and
advisors bring multidisciplinary experience, and a well-balanced and deep
knowledge in all aspects of the Company’s business including research and
development, engineering, intellectual property, project development, business
development & commercialization, and management of companies related to the
development and commercialization of products in the renewable energy space. The Company is supported by a global
network of advisors, research institutes, and universities.
The EWP team
is highly experienced in the wave energy sector and has a proven track record
in projects execution and installing and operating wave energy projects as the
Company already has operational projects in Gibraltar and Israel and a global
projects pipeline of over 325MW under development.